Vinyl Surface Floors

We offer the entire range of Rosco vinyl surface floors. Two of the most popular floors, Rosco Dance Floor and Adagio, are described here. If you need additional choices, contact us.

Rosco Dance Floor
This highly portable Marley type vinyl floor is excellent for situations where a permanent dance floor cannot be installed. Dance Floor is lightweight (less than 2 pounds per linear foot, 255 pounds per roll) and flexible, so it can be rolled and unrolled as needed. This makes the floor ideal for situations such as touring dance companies, and theatres without a permanent dance floor. The matte non-skid finish provides the controlled skip dancers require. Dance Floor is reversible with black on one side and your choice of white or grey on the other.

Adagio
If versatility in usage is your primary concern, Adagio should be your first choice. It is recommended for tap but its non-reflective, controlled slip vinyl surface makes it equally successful as a ballet, modern and jazz floor. Because it is dimensionally stable it can be permanently installed using Rosco adhesives for long term use.




Rosco SubFloor

Rosco SubFloor was developed and tested by dancers to insure the perfect combination of resilience (spring or bounce) and stability. It is flexible enough to absorb the energy from a dancer's impact but provides the right amount of resistance for dance movements ranging from ballet to tap, including folk, modern, Flamenco and Irish dancing.

Most users will be able to install the Rosco SubFloor on their own. The 42" x 42" (3.5 ft. x 3.5 ft.) panels lock into each other with the unique WaveLock® design. Panels weigh only 44 pounds each. Perimeter pieces, 4 3/8" wide, lock the entire floor together. The perimeter of Rosco SubFloor systems can be bolted to concrete or wood floors and can also be removed and re-used in case of a change in venue.

An integral part of the Rosco SubFloor system is the 4.5" diameter closed cell foam pads. These 1" thick pads are affixed at specific locations on the underside of each SubFloor panel. This, combined with the Medium Density Fiberboard (MDF) construction of the panels, utilizing our patented WaveLock® technology, yields superb resilience and dimensional stability.

Phone: (301) 698-9242
Fax: (301) 846-0369
Email Sales@parlights.com